Chapter 6 Consumables
This chapter describes how to replace and purchase consumables and regular replacement parts.
• Before you replace the consumables of the ScanSnap, unplug the power cable from the
WARNING
• To avoid injuries, do not place the internal parts (such as the Pad ASSY and pick roller)
6.1 Part Numbers and Replacement Cycle of Consumables
The following table lists the part numbers of consumables and shows rough guidelines for replacing these
parts.
No
Description
1
Pick roller
2
Pad ASSY
These replacement cycles are rough guidelines when A4/Letter wood-free paper 80g/m
The actual cycle may differ depending on the scanned paper.
Use only the consumables specified by PFU LIMITED.
Use the following procedure to check the target values for
replacement and usage information of consumables.
HINT
1. Click and hold the ScanSnap Manager icon in the Dock
2. Click [Check consumable supplies] on the menu.
For information on how to replace the Pad ASSY and the pick roller, refer to "9.2 Replacing
the Pad ASSY" and "9.3 Replacing the Pick Roller" respectively in the "ScanSnap
S510M Operator's Guide."
33
power outlet to prevent from fire or electric shock.
in areas where small children can reach.
P/N
PA03360-0001
PA03360-0002
menu.
⇒
The "ScanSnap Manager - Check consumable
status" window appears. This window indicates
how many times consumables have been used.
Replace consumables using "Target value to change supplies" as guidelines.
For details about purchasing consumables, visit the website below or contact the FUJITSU
scanner dealer where you purchased your ScanSnap.
[Website] http://scansnap.fujitsu.com/
Replacement Cycle
100,000 sheets or one year
50,000 sheets or one year
2
(21 lb) is used.