Fujitsu S510M - ScanSnap - Document Scanner Getting Started Manual - Page 32

Browse online or download pdf Getting Started Manual for Scanner Fujitsu S510M - ScanSnap - Document Scanner. Fujitsu S510M - ScanSnap - Document Scanner 35 pages. Color image scanner
Also for Fujitsu S510M - ScanSnap - Document Scanner: Installation Procedures (3 pages), Specifications (2 pages), Quick Installation Manual (2 pages), Getting Started Manual (24 pages), Cleaning Instructions (2 pages), Cleaning Instructions (2 pages)

Print Page

5.3 Cleaning Inside of the ScanSnap

Clean inside of the ScanSnap with a cloth moistened with Cleaner F1.

In an alternating succession of scanning documents, the accumulated paper-powder and dust inside the

ScanSnap causes a scanning error.

As a guideline, clean the ADF every 1000 sheets of documents. Note that this guideline varies according

to the type of documents you are scanning. For example, the ADF must be cleaned more frequently when

scanning documents on that the toner has not been sufficiently fixed on.

Clean the ADF according to the following procedure referring to the illustrations.

The glass surface inside the ADF becomes hot during the ScanSnap operation.

Before you start cleaning the inside of the ScanSnap, disconnect the AC adapter from

CAUTION

the outlet, and wait at least 15 minutes to let the ScanSnap cool down.

Never use water or neutral detergent to clean the inside of the ScanSnap.

ATTENTION

1. Open the ADF while pulling the cover open lever.

Cover open lever

ADF

Paper chute