Fujitsu S510M - ScanSnap - Document Scanner Getting Started Manual - Page 33

Browse online or download pdf Getting Started Manual for Scanner Fujitsu S510M - ScanSnap - Document Scanner. Fujitsu S510M - ScanSnap - Document Scanner 35 pages. Color image scanner
Also for Fujitsu S510M - ScanSnap - Document Scanner: Installation Procedures (3 pages), Specifications (2 pages), Quick Installation Manual (2 pages), Getting Started Manual (24 pages), Cleaning Instructions (2 pages), Cleaning Instructions (2 pages)

Print Page

2. Clean the following locations with a cloth moistened with Cleaner F1.

For more details, refer to "Chapter 8 Daily Care" in the "ScanSnap S510M Operator's

Guide."

5.4 Cleaning the Carrier Sheet

If the Carrier Sheet is used extensively, dirt and dust may stick onto the surface or the interior and cause

scanning errors. Clean it regularly.

Use a dry, soft cloth, or a soft cloth slightly moistened with Cleaner F1 or a mild detergent to lightly clean

off the dirt and dust from the surface and the interior of the Carrier Sheet.

• Never use paint thinner or other organic solvents.

ATTENTION

• Do not rub too hard. Otherwise, the Carrier Sheet may be scratched or be deformed.

• After cleaning the interior of the Carrier Sheet with Cleaner F1 or a mild detergent, dry the

Carrier Sheet completely before closing it.

• As a guideline, it is recommended to replace the Carrier Sheet every 500 scans.

Refer to "6.2 Purchasing the Carrier Sheet" (page 34) for details on purchasing a Carrier

Sheet.

Pad ASSY

Eject roller (x2)

Plastic roller (x4)

Glass

(x2)

(Located on the ADF cover and the base unit.)

ScanSnap S510M Getting Started

Pick roller

Feed roller

(x2)