DG FPGA Setup

Browse online or download pdf Setup for Computer Hardware DG FPGA. DG FPGA 10 pages.
Also for DG FPGA: Setup (5 pages), Setup (14 pages), Setup (20 pages), Setup (8 pages), Setup (18 pages)

Print Page

dg_ftp10g_server_fpgasetup_en.doc

This document describes how to setup FPGA board and prepare the test environment for running

FTP 10G Server demo on FPGA development board by using FileZilla version 3.45.1 as FTP

client. NVMe SSD is applied as the storage for storing file transferred with TestPC by using FTP

protocol via 10Gb Ethernet. User sets the test parameters on FPGA and monitors the hardware

status via Serial console.

1 Environment Requirement

To run FTP Server demo, please prepare following test environment.

1) FPGA development board: KCU105 or ZCU106

2) Test PC with 10 Gigabit Ethernet support or 10 Gigabit Ethernet card with the installed

program as follows:

• Vivado tool for program the FPGA

• FileZilla version 3.45.1 to be test application

• Serial console software such as HyperTerminal or TeraTerm installed on PC. The

setting on the console is Baudrate=115,200, Data=8-bit, Non-parity, and Stop=1.

3) 10 Gb Ethernet cable:

a) 10 Gb SFP+ Passive Direct Attach Cable (DAC) which has 1-m or less length

b) 10 Gb SFP+ Active Optical Cable (AOC)

c) 2x10 Gb SFP+ transceiver (10G BASE-R) with optical cable (LC to LC, Multimode)

4) The PCIe adapter board (AB18-PCIeX16, AB17-M2FMC or AB16-PCIeXOVR) provided

by Design Gateway

https://dgway.com/ABseries_E.html

5) NVMe SSD connecting to PCIe adapter board

6) Two micro USB cables connecting between FPGA board and PC (one for programming

FPGA and another for Serial console)

7) Xilinx power adapter for FPGA board

8) ATX power supply for AB18-PCIeX16 adapter board

22-Jul-20

FTP 10G Server FPGA Setup

Rev2.0 22-Jul-20

Page 1