HP 2133 User Manual - Page 12

Browse online or download pdf User Manual for Desktop HP 2133. HP 2133 39 pages. Hp compaq presario,presario 2100: network guide
Also for HP 2133: Specification (27 pages), User Manual (25 pages), Basic Setup (14 pages), User Manual (20 pages), Multiboot User Manual (17 pages), Maintenance Manual (14 pages), Product End-Of-Life Disassembly Instructions (34 pages)

Print Page
HP 2133 User Manual
Completing the Setup
7
Select the Data encryption (WEP enabled) check box.
8
Clear the The key is provided for me automatically check box.
9
Type the network key in the Network key box and again in the Confirm network key box.
NOTE—It is not necessary to select the Key format or the Key length before typing the network key. These
settings automatically change to the appropriate setting as the network key is typed.
10
The default settings in Microsoft Windows XP Service Pack 1 require IEEE 802.1x authentication. With IEEE
802.1x authentication enabled, connecting to a network requires a connection with an authentication server. If
the network has no authentication server, the connection is disabled every 3 minutes. Therefore, when
connecting to a network that has no authentication server, disable IEEE 802.1x authentication by doing the
following (if the network does have an authentication server, ignore this step):
•
Click the Authentication tab.
•
Clear the Enable network access control using IEEE 802.1x check box.
11
Click OK. The network name and icon appear at the top of the list under Preferred networks.
12
Click OK to activate the network connection. To verify that the network connection has been made, reopen
Wireless Network Connection Properties for that wireless network and click the Wireless Networks tab.
The computer is connected to the selected network when a blue bubble appears on top of the icon
network. If the bubble does not appear, click Refresh. If it still does not appear, try to access a Web page to
verify that an Internet connection exists.
Page
8
for that
User Guide