HP StorageWorks 8B - FC Entry Switch Installation Instructions Manual - Page 14

Browse online or download pdf Installation Instructions Manual for Switch HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 20 pages. Fabric os release notes version 3.0.1b
Also for HP StorageWorks 8B - FC Entry Switch: Update Manual (9 pages), User Manual (22 pages), Firmware Release Notes (14 pages), Installation Manual (14 pages), Release Note (26 pages), Manual (50 pages), User Manual (44 pages), User Manual (44 pages), User Manual (38 pages), User Manual (38 pages), User Manual (37 pages), User Manual (30 pages), Release Note (16 pages)

Print Page
HP StorageWorks 8B - FC Entry Switch Installation Instructions Manual
Figure 6: Assembling the outer rails (HP System/e rack)
5. Determine the number of #8-32 x 3/16-inch Phillips pan-head screws with
Table 1: Number of screws required to assemble the inner rails
SAN Switch 2/32
SAN Switch 2/16
SAN Switch 2/8
14
— For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head
screws with captive star lock washers and two #10 alignment washers in
the upper and lower hole locations of the right rail. Then install two
#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers
and two #10 alignment washers in the upper and lower hole locations of
the left rail. See
thread lock required to assemble the inner rails by referring to
Switch
Figure
6.
Number of #8-32 x 3/16-inch Screws
SAN Switch Rack Mount Kit Installation Instructions
12
10
14
Table
1.