HP Xw460c - ProLiant - Blade Workstation Installation Manual - Page 28

Browse online or download pdf Installation Manual for Switch HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 pages. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Also for HP Xw460c - ProLiant - Blade Workstation: Implementation Manual (35 pages), Error Prevention Manual (12 pages), Technical White Paper (12 pages), Firmware Update (9 pages), Installation Manual (2 pages), Frequently Asked Questions Manual (14 pages), Setup Poster (9 pages), Management Manual (28 pages), Hardware Manual (23 pages), Overview (35 pages), User Manual (33 pages), Optimization Manual (13 pages), Limited Warranty (10 pages), Installation Instructions Manual (10 pages), Installation Instructions Manual (8 pages), Installation Instructions (4 pages), Installation Instructions (2 pages)

Print Page
HP Xw460c - ProLiant - Blade Workstation Installation Manual
Table 4-6 Device Bay EBIPA table (HP BladeSystem c3000 device bay range is 1 to 8)
Bay
1
2
3
4
5
6
7
8
28
Onboard Administrator installation configuration parameters
EBIPA enabled (Y/N)
Possible value
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
EBIPA address
Possible value
parameter
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
Description
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled