HP Xw460c - ProLiant - Blade Workstation Installatiehandleiding - Pagina 28

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 pagina's. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ook voor HP Xw460c - ProLiant - Blade Workstation: Implementatiehandleiding (35 pagina's), Handleiding voor foutpreventie (12 pagina's), Technisch witboek (12 pagina's), Firmware bijwerken (9 pagina's), Installatiehandleiding (2 pagina's), Handleiding met veelgestelde vragen (14 pagina's), Poster opstellen (9 pagina's), Management Handleiding (28 pagina's), Hardware Handleiding (23 pagina's), Overzicht (35 pagina's), Gebruikershandleiding (33 pagina's), Handleiding voor optimalisatie (13 pagina's), Beperkte garantie (10 pagina's), Handleiding voor installatie-instructies (10 pagina's), Handleiding voor installatie-instructies (8 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (2 pagina's)

Pagina afdrukken
HP Xw460c - ProLiant - Blade Workstation Installatiehandleiding
Table 4-6 Device Bay EBIPA table (HP BladeSystem c3000 device bay range is 1 to 8)
Bay
1
2
3
4
5
6
7
8
28
Onboard Administrator installation configuration parameters
EBIPA enabled (Y/N)
Possible value
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
EBIPA address
Possible value
parameter
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
###.###.###.###,
where ### ranges
from 0 to 255
Description
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled
The IP address
assigned to the
device bay if EBIPA
is enabled