HP Xw460c - ProLiant - Blade Workstation Installatiehandleiding - Pagina 29

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 pagina's. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ook voor HP Xw460c - ProLiant - Blade Workstation: Implementatiehandleiding (35 pagina's), Handleiding voor foutpreventie (12 pagina's), Technisch witboek (12 pagina's), Firmware bijwerken (9 pagina's), Installatiehandleiding (2 pagina's), Handleiding met veelgestelde vragen (14 pagina's), Poster opstellen (9 pagina's), Management Handleiding (28 pagina's), Hardware Handleiding (23 pagina's), Overzicht (35 pagina's), Gebruikershandleiding (33 pagina's), Handleiding voor optimalisatie (13 pagina's), Beperkte garantie (10 pagina's), Handleiding voor installatie-instructies (10 pagina's), Handleiding voor installatie-instructies (8 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (2 pagina's)

Pagina afdrukken
HP Xw460c - ProLiant - Blade Workstation Installatiehandleiding
Bay
EBIPA enabled (Y/N)
9
10
1 1
12
13
14
15
16
Possible value
EBIPA address
parameter
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
Server and interconnect EBIPA configuration parameters
Possible value
Description
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
29