HP Xw460c - ProLiant - Blade Workstation Installation Manual - Page 29

Browse online or download pdf Installation Manual for Switch HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 pages. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Also for HP Xw460c - ProLiant - Blade Workstation: Implementation Manual (35 pages), Error Prevention Manual (12 pages), Technical White Paper (12 pages), Firmware Update (9 pages), Installation Manual (2 pages), Frequently Asked Questions Manual (14 pages), Setup Poster (9 pages), Management Manual (28 pages), Hardware Manual (23 pages), Overview (35 pages), User Manual (33 pages), Optimization Manual (13 pages), Limited Warranty (10 pages), Installation Instructions Manual (10 pages), Installation Instructions Manual (8 pages), Installation Instructions (4 pages), Installation Instructions (2 pages)

Print Page
HP Xw460c - ProLiant - Blade Workstation Installation Manual
Bay
EBIPA enabled (Y/N)
9
10
1 1
12
13
14
15
16
Possible value
EBIPA address
parameter
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
To enable EBIPA,
select the checkbox.
To disable EBIPA,
clear the checkbox.
By default, the
checkbox is not
selected.
Server and interconnect EBIPA configuration parameters
Possible value
Description
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
###.###.###.###,
The IP address
where ### ranges
assigned to the
from 0 to 255
device bay if EBIPA
is enabled
29