Olympus EVOLT E-300 Quick Manual - Page 5

Browse online or download pdf Quick Manual for Digital Camera Olympus EVOLT E-300. Olympus EVOLT E-300 5 pages. Evolt e-300 manuel de base (français)
Also for Olympus EVOLT E-300: Quick Start Manual (2 pages), Brochure & Specs (10 pages), Basic Manual (34 pages), Specifications (3 pages), (Spanish) Basic Manual (34 pages), (French) Manuel De Base (34 pages)

Print Page
Olympus EVOLT E-300 Quick Manual
F5.6 + 5 digits - focal length change. The digits are to be entered from greatest to least. If the
focal length is less than 5 digits, add zeros. For example for 50mm: 00050. All five digits have to be
entered.
Therefore to change focal length to 50mm, press the preview button successively on the following
apertures: F5.6 (command), F4.0 (the first digit is 0), F4.0 (the second digit is 0), F4.0 (the third
digit is 0), F7.1 (the forth digit is 5), F4.0 (the fifth digit is 0).
Focal length ranges from 00001mm to 65535mm. If the command and five digits are entered
correctly, an aperture sign "-.-" will appear on the display. Press lens reset button and check the
result.
F8.0 + 2 digits from 01 to 17 - correction of focus confirmation dot - or Dandelion
calibration function. You may move the dot a bit forward or backward, to manually find the
calibration constant. By default Dandelion is set for the center, constant 09
F11 + 2 digits - delay before entering the program mode. This is set to 10 seconds by default.
You can change it into 01 to 99 seconds.
Mind that if the delay timing is set to 60 to 99 seconds, you will have to hold the preview button
continuously for more than 1 minute to enter the program mode. The camera may enter the sleep
mode during this time, so make sure that the sleep mode is activated no earlier than after 2 minutes
in your camera.