Olympus EVOLT E-300 Skrócona instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Aparat cyfrowy Olympus EVOLT E-300. Olympus EVOLT E-300 5 stron. Evolt e-300 manuel de base (français)
Również dla Olympus EVOLT E-300: Skrócona instrukcja obsługi (2 strony), Broszura i specyfikacje (10 strony), Podręcznik podstawowy (34 strony), Specyfikacje (3 strony), (Hiszpański) Podręcznik podstawowy (34 strony), (francuski) Manuel De Base (34 strony)

F5.6 + 5 digits - focal length change. The digits are to be entered from greatest to least. If the

focal length is less than 5 digits, add zeros. For example for 50mm: 00050. All five digits have to be

entered.

Therefore to change focal length to 50mm, press the preview button successively on the following

apertures: F5.6 (command), F4.0 (the first digit is 0), F4.0 (the second digit is 0), F4.0 (the third

digit is 0), F7.1 (the forth digit is 5), F4.0 (the fifth digit is 0).

Focal length ranges from 00001mm to 65535mm. If the command and five digits are entered

correctly, an aperture sign "-.-" will appear on the display. Press lens reset button and check the

result.

F8.0 + 2 digits from 01 to 17 - correction of focus confirmation dot - or Dandelion

calibration function. You may move the dot a bit forward or backward, to manually find the

calibration constant. By default Dandelion is set for the center, constant 09

F11 + 2 digits - delay before entering the program mode. This is set to 10 seconds by default.

You can change it into 01 to 99 seconds.

Mind that if the delay timing is set to 60 to 99 seconds, you will have to hold the preview button

continuously for more than 1 minute to enter the program mode. The camera may enter the sleep

mode during this time, so make sure that the sleep mode is activated no earlier than after 2 minutes

in your camera.