Olympus SZX-RFL3 Instructions Manual - Page 16

Browse online or download pdf Instructions Manual for Laboratory Equipment Olympus SZX-RFL3. Olympus SZX-RFL3 22 pages. Fluorescence attachment

Print Page

Fig. 17

4. Project the arc image on the stage plate by turning the collector lens

focusing knob ƒ. (A)

...

If the arc image is not protected, adjust the burner centering knobs ....

5. Ring the arc image on the center of the upper (or lower) half of the field by

turning the burner centering knobs .... (B)

6. Focus on the mirror arc image by adjusting the mirror focus screw († in

Fig. 7) on the rear of the lamp housing using the Allen screwdriver. (C)

7. Overlay the arc image with the mirror arc image by turning the burner

centering knobs .... (D)

}During observation, adjust the collector lens focusing knob ƒ so that the

observed field is uniform.

}Hereafter, the mercury burner centering needs not be adjusted until the

next time the mercury burner is replaced.

SZX–RFL3