Siemens SINAMICS G120 Compact Operating Instructions - Page 9

Browse online or download pdf Compact Operating Instructions for Industrial Equipment Siemens SINAMICS G120. Siemens SINAMICS G120 32 pages. Using blocksize converters in marine applications
Also for Siemens SINAMICS G120: Getting Started (46 pages), Operating Instructions Manual (32 pages), Getting Started (30 pages), Hardware Installation Instructions (2 pages), Installation Instructions And Owner's Manual (2 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Manual (42 pages), Getting Started (50 pages), Device Manual (34 pages), Quick Install Manual (2 pages), Application Description (50 pages), Compact Operating Instructions (2 pages), Manual (31 pages), Applications Manual (34 pages), Compact Operating Instructions (2 pages), Compact Operating Instructions (2 pages)

Print Page

Table 3- 2

Solid or flexible conduc-

Wiring the terminal strip in compliance with EMC

● If you use shielded cables, then you must connect the shield to the mounting plate of the

control cabinet or with the shield support of the inverter through a good electrical

connection and a large surface area.

● Use the shield connection plate of the Control Unit as shield support and strain relief.

Table 3- 3

Shield connection kit 2 for the CU240B-2 and CU240E-2 Control Units with

all fieldbus interfaces except for PROFINET.

Shield connection kit 3 for the CU230P-2 and CU240E-2 Control Units with

PROFINET interface

Further information about EMC-compliant wiring is available on the Internet: EMC installation

guideline (http://support.automation.siemens.com/WW/view/en/60612658)

Interfaces at the lower side of the CU240B-2 and CU240E-2 Control Units

CU240B-2 and CU240E-2 Control Units

Compact Operating Instructions, 04/2015, A5E35792002B AA

Permissible cable and wiring options

Finely stranded con-

tors

ductor with non-

insulated end sleeve

Article numbers

3.2 Overview of the interfaces

Finely stranded con-

ductor with partially

insulated end sleeve

with partially insulated

6SL3264-1EA00-0HA0

6SL3264-1EA00-0HB0

Installing

Two finely stranded

conductors with the

same cross-section

twin end sleeves