Siemens SINAMICS G120 Getting Started - Page 29

Browse online or download pdf Getting Started for Industrial Equipment Siemens SINAMICS G120. Siemens SINAMICS G120 50 pages. Using blocksize converters in marine applications
Also for Siemens SINAMICS G120: Getting Started (46 pages), Operating Instructions Manual (32 pages), Getting Started (30 pages), Hardware Installation Instructions (2 pages), Installation Instructions And Owner's Manual (2 pages), Installation Instructions (2 pages), Installation Instructions (2 pages), Compact Operating Instructions (32 pages), Manual (42 pages), Device Manual (34 pages), Quick Install Manual (2 pages), Application Description (50 pages), Compact Operating Instructions (2 pages), Manual (31 pages), Applications Manual (34 pages), Compact Operating Instructions (2 pages), Compact Operating Instructions (2 pages)

Print Page
Siemens SINAMICS G120 Getting Started
Default setting 7: Switch over between fieldbus and jogging using DI 3
Selected with
STARTER: Fieldbus with data set switchover
•
BOP-2: FB cdS
•
Factory setting for inverters with PROFIBUS or PROFINET interface
PROFIdrive telegram 1
The CU 240B-2 does not have
terminals 16 and 17
Default setting 9: Motorized
potentiometer (MOP)
All Control Units
Selected with
STARTER: standard I/O with MOP
•
BOP-2: Std MoP
•
Fieldbus interface is not active.
The CU 240B-2 does not have
terminals 16 and 17
Converter with Control Units CU230P-2; CU240B-2; CU240E-2
Getting Started, 04/2014, A5E32885834B AB
All Control Units
Fieldbus interface is not active.
The CU 240B-2 does not have
terminals 16 and 17
Default setting 12: Two-wire control
with method 1
All Control Units
Selected with
STARTER: Standard I/O with
•
analog setpoint
BOP-2: Std ASP
•
Factory setting for inverters with RS485
interface
Fieldbus interface is not active.
The CU 240B-2 does not have
terminals 16 and 17
3.3 Installing Control Unit
Default setting 8: Motorized
potentiometer (MOP) with safety
function
Control Units CU240E-2
Selected with
STARTER: MOP with Basic Safety
•
BOP-2: MoP SAFE
•
Fieldbus interface is not active.
Default setting 13: Setpoint via analog
input with safety function
Control Units CU240E-2
Selected with
STARTER: Standard I/O with
•
analog setpoint and safety
BOP-2: ASPS
•
Fieldbus interface is not active.
Installing
29