Siemens SIREMOBIL Compact L Instructions Manual - Page 10
Browse online or download pdf Instructions Manual for Industrial Equipment Siemens SIREMOBIL Compact L. Siemens SIREMOBIL Compact L 21 pages.
Also for Siemens SIREMOBIL Compact L: Installation And Setting Instructions Manual (28 pages), Installation And Setting Instructions (4 pages), Installation Instructions Manual (6 pages)
Print Page
10
Replacement of the 15" LCD Color TFT Display
Replacing the TFT display
•
Disconnect the low voltage plug from the TFT display
•
Disconnect the VGA plug from the TFT display.
•
Loosen the 4 screws at the rear side of the TFT display and remove it from the holder
NOTE
Fig. 3
•
Install the new display with the 4 mounting screws.
•
Connect the low voltage plug and the VGA plug at the new display.
•
Check the input selection switch (at the bottom side of the TFT display).
The switch can be set in 3 positions:
Position to the rear: VGA input selected
- Set this position, if VGA video cables are used.
Middle position: BNC-Input selected, 75 Ohm terminating resistor is off.
- Set this position only, if additional video components are installed at the same video
source as the TFT display.
Position to the front: BNC input selected, 75 Ohm terminating resistor is on.
- Set this position, if BNC video cable is used and no additional video component is
installed at the same video source as the TFT display is connected.
•
Check the functions of the TFT displays.
•
Check the automatically detected video mode.
•
Check the geometry of the displayed image.
•
Adjust the brightness, contrast and back light intensity.
Siremobil Compact L
Hold the TFT display while loosening the mounting screw to
prevent damage to the TFT display or the environment
SPR2-130.841.03
Rev. 02
Page 10 of 20
06.05
CS PS 24
1
Siemens AG
Medical Solutions