Siemens SIWAREX WL230 BB-S SA Equipment Manual - Page 31
Browse online or download pdf Equipment Manual for Industrial Equipment Siemens SIWAREX WL230 BB-S SA. Siemens SIWAREX WL230 BB-S SA 50 pages. Base plate and elastomer bearing bb-s sa
Also for Siemens SIWAREX WL230 BB-S SA: Manual (36 pages), Operating Instructions Manual (48 pages), Operating Instructions Manual (44 pages)
Print Page
7. For all bracket plates to lie flat on the top plates, insert the compensation plates.
8. Tighten the bolted connections with the specified tightening torque (Page 39).
Result
①
②
③
④
Figure 5-5
The load bearing implement of the scale is in the following condition:
• The compact mounting units are in the installation state. Perform light installation work.
• The upper hexagon nuts
• There is a clearance of approximately 3 mm between the upper pressure piece and the
pendulum bolt.
• There is no load on the load cells.
• The compact mounting units are aligned to one another as much as possible.
• The compact mounting units act as dummies.
• The compact mounting units provide protection during transport.
SB-S SA
Equipment Manual, 12/2020, A5E02390707B-03
Bracket plate
Top plate
Upper hexagon nut
Lower hexagon nut
Installed compact mounting unit
③
5.2 Installing the compact installation unit
②
clamp the top plate
.
Installation
31