Siemens SIWAREX WL230 BB-S SA Руководство по оборудованию - Страница 31
Просмотреть онлайн или скачать pdf Руководство по оборудованию для Промышленное оборудование Siemens SIWAREX WL230 BB-S SA. Siemens SIWAREX WL230 BB-S SA 50 страниц. Base plate and elastomer bearing bb-s sa
Также для Siemens SIWAREX WL230 BB-S SA: Руководство (36 страниц), Руководство по эксплуатации (48 страниц), Руководство по эксплуатации (44 страниц)
Печатать страницу
7. For all bracket plates to lie flat on the top plates, insert the compensation plates.
8. Tighten the bolted connections with the specified tightening torque (Page 39).
Result
①
②
③
④
Figure 5-5
The load bearing implement of the scale is in the following condition:
• The compact mounting units are in the installation state. Perform light installation work.
• The upper hexagon nuts
• There is a clearance of approximately 3 mm between the upper pressure piece and the
pendulum bolt.
• There is no load on the load cells.
• The compact mounting units are aligned to one another as much as possible.
• The compact mounting units act as dummies.
• The compact mounting units provide protection during transport.
SB-S SA
Equipment Manual, 12/2020, A5E02390707B-03
Bracket plate
Top plate
Upper hexagon nut
Lower hexagon nut
Installed compact mounting unit
③
5.2 Installing the compact installation unit
②
clamp the top plate
.
Installation
31