Siemens SIWAREX WL230 BB-S SA 장비 매뉴얼 - 페이지 31
{카테고리_이름} Siemens SIWAREX WL230 BB-S SA에 대한 장비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAREX WL230 BB-S SA 50 페이지. Base plate and elastomer bearing bb-s sa
Siemens SIWAREX WL230 BB-S SA에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 사용 설명서 (48 페이지), 사용 설명서 (44 페이지)
페이지 인쇄
7. For all bracket plates to lie flat on the top plates, insert the compensation plates.
8. Tighten the bolted connections with the specified tightening torque (Page 39).
Result
①
②
③
④
Figure 5-5
The load bearing implement of the scale is in the following condition:
• The compact mounting units are in the installation state. Perform light installation work.
• The upper hexagon nuts
• There is a clearance of approximately 3 mm between the upper pressure piece and the
pendulum bolt.
• There is no load on the load cells.
• The compact mounting units are aligned to one another as much as possible.
• The compact mounting units act as dummies.
• The compact mounting units provide protection during transport.
SB-S SA
Equipment Manual, 12/2020, A5E02390707B-03
Bracket plate
Top plate
Upper hexagon nut
Lower hexagon nut
Installed compact mounting unit
③
5.2 Installing the compact installation unit
②
clamp the top plate
.
Installation
31