Samsung 65" 650TS Interactive Whiteboard LCD Quick Start Manual - Page 20
Browse online or download pdf Quick Start Manual for Monitor Samsung 65" 650TS Interactive Whiteboard LCD. Samsung 65" 650TS Interactive Whiteboard LCD 30 pages. Samsung lcd display quick start guide
Also for Samsung 65" 650TS Interactive Whiteboard LCD: Quick Start Manual (30 pages)
Print Page
1.
Locate the AV output jacks on the camcorder. They are usually found on the side or back
of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on
the camcorder and the [AV/COMPONENT AUDIO IN [L-AUDIO-R]] on the LCD Display .
2.
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [AV
IN [VIDEO]] on the LCD Display .
3.
Select AV for the Camcorder connection using the SOURCE button on the front of the
LCD Display or on the remote control.
4.
Then, start the Camcorder with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Connecting Using a DVI Cable
1.
Connect between the [DVI OUT] port on the LCD Display and the input port on another
monitor using a DVI cable.
2.
Connect between the [AUDIO OUT] port on the LCD Display and the audio input port on
another monitor using a stereo cable.
3.
Select DVI using the SOURCE button on the front of the LCD Display or on the remote
control.
Note
DVI OUT does not support HDCP.
Connections