Samsung 65" 650TS Interactive Whiteboard LCD Skrócona instrukcja obsługi - Strona 20

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Monitor Samsung 65" 650TS Interactive Whiteboard LCD. Samsung 65" 650TS Interactive Whiteboard LCD 30 stron. Samsung lcd display quick start guide
Również dla Samsung 65" 650TS Interactive Whiteboard LCD: Skrócona instrukcja obsługi (30 strony)

Drukuj stronę

Locate the AV output jacks on the camcorder. They are usually found on the side or back

of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on

the camcorder and the [AV/COMPONENT AUDIO IN [L-AUDIO-R]] on the LCD Display .

Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [AV

IN [VIDEO]] on the LCD Display .

Select AV for the Camcorder connection using the SOURCE button on the front of the

LCD Display or on the remote control.

Then, start the Camcorder with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check

your local electronics store.) If your camcorder is stereo, you need to connect a set of two

cables.

Connecting Using a DVI Cable

Connect between the [DVI OUT] port on the LCD Display and the input port on another

monitor using a DVI cable.

Connect between the [AUDIO OUT] port on the LCD Display and the audio input port on

another monitor using a stereo cable.

Select DVI using the SOURCE button on the front of the LCD Display or on the remote

control.

Note

DVI OUT does not support HDCP.

Connections