Samsung 65" 650TS Interactive Whiteboard LCD Snelstarthandleiding - Pagina 20
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Samsung 65" 650TS Interactive Whiteboard LCD. Samsung 65" 650TS Interactive Whiteboard LCD 30 pagina's. Samsung lcd display quick start guide
Ook voor Samsung 65" 650TS Interactive Whiteboard LCD: Snelstarthandleiding (30 pagina's)
Pagina afdrukken
1.
Locate the AV output jacks on the camcorder. They are usually found on the side or back
of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on
the camcorder and the [AV/COMPONENT AUDIO IN [L-AUDIO-R]] on the LCD Display .
2.
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [AV
IN [VIDEO]] on the LCD Display .
3.
Select AV for the Camcorder connection using the SOURCE button on the front of the
LCD Display or on the remote control.
4.
Then, start the Camcorder with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Connecting Using a DVI Cable
1.
Connect between the [DVI OUT] port on the LCD Display and the input port on another
monitor using a DVI cable.
2.
Connect between the [AUDIO OUT] port on the LCD Display and the audio input port on
another monitor using a stereo cable.
3.
Select DVI using the SOURCE button on the front of the LCD Display or on the remote
control.
Note
DVI OUT does not support HDCP.
Connections