Cisco NCS 5500 Series Connection Manual - Page 19

Browse online or download pdf Connection Manual for Network Router Cisco NCS 5500 Series. Cisco NCS 5500 Series 24 pages. Connect router to the network
Also for Cisco NCS 5500 Series: Configuration Manual (19 pages), Manual (25 pages)

Print Page
Cisco NCS 5500 Series Connection Manual
Connect Router to the Network
Figure 16: Cabling a Transceiver Module
Removing the QSFP Transceiver Module
Caution
The QSFP transceiver module is a static-sensitive device. Always use an ESD wrist strap or similar individual
grounding device when handling transceiver modules or coming into contact with modules.
To remove a QSFP transceiver module, follow these steps:
Step 1
Disconnect the network interface cable from the transceiver connector.
Step 2
Install the dust plug immediately into the transceiver's optical bore
Step 3
Grasp the pull-tab and gently pull to release the transceiver from the socket.
Figure 17: Removing the QSFP Transceiver Module
Step 4
Slide the transceiver out of the socket.
Removing the QSFP Transceiver Module
Connect Router to the Network
19