Cisco NCS 5500 Series 연결 매뉴얼 - 페이지 19

{카테고리_이름} Cisco NCS 5500 Series에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco NCS 5500 Series 24 페이지. Connect router to the network
Cisco NCS 5500 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (19 페이지), 매뉴얼 (25 페이지)

페이지 인쇄
Cisco NCS 5500 Series 연결 매뉴얼
Connect Router to the Network
Figure 16: Cabling a Transceiver Module
Removing the QSFP Transceiver Module
Caution
The QSFP transceiver module is a static-sensitive device. Always use an ESD wrist strap or similar individual
grounding device when handling transceiver modules or coming into contact with modules.
To remove a QSFP transceiver module, follow these steps:
Step 1
Disconnect the network interface cable from the transceiver connector.
Step 2
Install the dust plug immediately into the transceiver's optical bore
Step 3
Grasp the pull-tab and gently pull to release the transceiver from the socket.
Figure 17: Removing the QSFP Transceiver Module
Step 4
Slide the transceiver out of the socket.
Removing the QSFP Transceiver Module
Connect Router to the Network
19