CAB WICON SQUIX Service Manual - Page 6

Browse online or download pdf Service Manual for Industrial Equipment CAB WICON SQUIX. CAB WICON SQUIX 18 pages. Wrap-around applicator

Print Page
2

Preparation

6
2.1

Tools

 Do not use any worn of damaged tools.
 Only use tools and testing devices that are suitable for the task at hand.
Standard tools:
•
Screw driver TX 10
•
Screw driver TX 20
•
Screw driver TX 25
•
Screw driver TX 30
•
Socket wrench 9
•
Allen key 2 mm
•
Allen key 2.5 mm
•
Open-end wrench 5
•
Snap ring pliers ZGG 0
•
Pointed pliers straight
•
Belt tension measuring device
cab special tools:
•
Calibration rod 10 mm (Part No. 5988543)
2.2

Removing the Applicator from the Printer

1
Fig. 1
Removing the applicator from the printer
 Switch off the printer.
 Loosen screw (2).
 Remove the applicator from the printer. The plug of the applicator will be disconnected from the connector (1).
2
3
6