CAB WICON SQUIX Servicehandleiding - Pagina 6
Blader online of download pdf Servicehandleiding voor {categorie_naam} CAB WICON SQUIX. CAB WICON SQUIX 18 pagina's. Wrap-around applicator
Pagina afdrukken2
Preparation
6
2.1
Tools
Do not use any worn of damaged tools.
Only use tools and testing devices that are suitable for the task at hand.
Standard tools:
•
Screw driver TX 10
•
Screw driver TX 20
•
Screw driver TX 25
•
Screw driver TX 30
•
Socket wrench 9
•
Allen key 2 mm
•
Allen key 2.5 mm
•
Open-end wrench 5
•
Snap ring pliers ZGG 0
•
Pointed pliers straight
•
Belt tension measuring device
cab special tools:
•
Calibration rod 10 mm (Part No. 5988543)
2.2
Removing the Applicator from the Printer
1
Fig. 1
Removing the applicator from the printer
Switch off the printer.
Loosen screw (2).
Remove the applicator from the printer. The plug of the applicator will be disconnected from the connector (1).
2
3
6