Cisco 1262 Installation Manual - Page 4

Browse online or download pdf Installation Manual for Wireless Access Point Cisco 1262. Cisco 1262 5 pages.

Print Page

Confirm access point power

There is a small LED on the face of the access point,

shown in Figure 8 as the small black square above the

CISCO label.

When the access point is receiving power, the LED

should illuminate green. The LED may flash initially and

then become solid green. This confirms the access

point is powered on.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate access point frequency energy

and, if not installed and used in accordance with the

installation instructions, may cause harmful interference

to access point communications.

You are cautioned that any changes or modifications

not expressly approved by the party responsible for

compliance could void the user's authority to operate

the equipment.

North America:

855-MOBVIEW (662-8839)

Latin America:

561-998-6114

Web site:

www.interlogix.com/mobileview

Cisco 1262 Access Point Installation Manual