Cisco NCS 4201 Installing Manual
Browse online or download pdf Installing Manual for Wireless Access Point Cisco NCS 4201. Cisco NCS 4201 42 pages.
Print PageThis chapter describes how to install the Cisco NCS 4201 and includes the following sections:
•
•
•
•
•
•
•
•
Prerequisites
Before installing the Cisco NCS 4201, it is important to prepare for the installation by:
• Preparing the site (site planning) and reviewing the installation plans or method of procedures (MOP).
• Unpacking and inspecting the Cisco NCS 4201. See
• Gathering the tools and test equipment required to properly install the Cisco NCS 4201. See
For more instructions on how to prepare for the installation of the Cisco NCS 4201, see
chapter.
Installing the Chassis in a Rack
The procedures in this section apply to both horizontal and vertical mounting of the chassis in a rack:
Prerequisites, page 1
Installing the Chassis in a Rack, page 1
Installing the Power Supply, page 12
Installing and Removing SFP Modules, page 24
Connecting a Chassis to the Network, page 34
See
Site Planning
section.
Equipment
section.
Receiving the Chassis
section.
Preparing for Installation
Cisco NCS 4201 Hardware Installation Guide
Tools and
1