Cisco NCS 4201 Installing Manual - Page 3

Browse online or download pdf Installing Manual for Wireless Access Point Cisco NCS 4201. Cisco NCS 4201 42 pages.

Print Page

Installing the Cisco NCS 4201

Installing the Chassis in the Rack

Note

Ensure adequate air flow when mounting the chassis in a rack. For more information, see the

Guidelines

Install the cable guides before installing the Cisco NCS 4201 on the rack. See

Note

section.

To install the chassis in the equipment rack, perform these steps:

Step 1

Position the chassis in the rack as follows:

• If the front of the chassis (front panel) is at the front of the rack, insert the rear of the chassis between the mounting

posts.

• If the rear of the chassis is at the front of the rack, insert the front of the chassis between the mounting posts.

Step 2

Align the mounting holes in the bracket with the mounting holes in the equipment rack.

section.

Installing the Chassis in the Rack

Attaching the Cable Guides

Cisco NCS 4201 Hardware Installation Guide

Air Flow