Cisco NCS 4201 Installing Manual - Page 2
Browse online or download pdf Installing Manual for Wireless Access Point Cisco NCS 4201. Cisco NCS 4201 42 pages.
Print PageInstalling the Chassis Brackets
Installing the Chassis Brackets
Figure 1: Z Rack Mounting Bracket
To install the brackets on the front of the chassis, perform these steps:
Step 1
Remove the rack-mount brackets from the accessory kit and position them beside the chassis.
Step 2
Position one of the brackets against the chassis side, and align the screw holes.The figure below shows how to attach
the brackets on the Cisco NCS 4201 for a 23-inch rack.
Figure 2: Attaching Mounting Brackets to Cisco NCS 4201 for a 23-inch Rack (Front Z-bracket))
Step 3
Secure the bracket to the chassis with the screws removed when performing Step 1. The recommended maximum torque
is 10 in.-lb.
Step 4
Repeat Step 3 and Step 3 for the other bracket.
Cisco NCS 4201 Hardware Installation Guide
2