Cisco WAP131 Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Wireless Access Point Cisco WAP131. Cisco WAP131 13 pages. Reboot and reset factory default settings
Also for Cisco WAP131: Quick Start Manual (13 pages), Manual (4 pages), Manual (4 pages)

Print Page

Placement Tips

• Ambient Temperature—To prevent the Cisco WAP131 from

overheating, do not operate it in an area that exceeds an ambient

temperature of 104°F (40°C).

• Air Flow—Both side panels have vents that must be unobstructed to

prevent overheating.

• Mechanical Loading—The Cisco WAP131 should be level, stable, and

secure to prevent it from sliding or shifting out of position.

Connecting the Cisco WAP131

The default configuration of the Cisco WAP131 has the Wi-Fi radio turned

off. You must perform the initial configuration using a wired Ethernet

connection.

To connect the Cisco WAP131 to the wired network:

Connect the Ethernet cable to the Ethernet port of a switch, a router,

TEP

or a PC.

Connect the other end of the network Ethernet cable to the

TEP

Ethernet port of the Cisco WAP131.

If PoE is not provided, plug in the supplied power adapter to

TEP

provide power to the Cisco WAP131.

After installation, all lights should be active. Refer to

Hardware Installation"

WAP131.

for details about the different lights on the Cisco

"Verifying the

Cisco WAP131 Quick Start Guide