Cisco WAP131 Manual de início rápido - Página 4
Procurar online ou descarregar pdf Manual de início rápido para Ponto de acesso sem fios Cisco WAP131. Cisco WAP131 13 páginas. Reboot and reset factory default settings
Também para Cisco WAP131: Manual de início rápido (13 páginas), Manual (4 páginas), Manual (4 páginas)
Imprimir página
Placement Tips
• Ambient Temperature—To prevent the Cisco WAP131 from
overheating, do not operate it in an area that exceeds an ambient
temperature of 104°F (40°C).
• Air Flow—Both side panels have vents that must be unobstructed to
prevent overheating.
• Mechanical Loading—The Cisco WAP131 should be level, stable, and
secure to prevent it from sliding or shifting out of position.
Connecting the Cisco WAP131
4
The default configuration of the Cisco WAP131 has the Wi-Fi radio turned
off. You must perform the initial configuration using a wired Ethernet
connection.
To connect the Cisco WAP131 to the wired network:
Connect the Ethernet cable to the Ethernet port of a switch, a router,
S
1
TEP
or a PC.
Connect the other end of the network Ethernet cable to the
S
2
TEP
Ethernet port of the Cisco WAP131.
If PoE is not provided, plug in the supplied power adapter to
S
3
TEP
provide power to the Cisco WAP131.
After installation, all lights should be active. Refer to
Hardware Installation"
WAP131.
4
for details about the different lights on the Cisco
"Verifying the
Cisco WAP131 Quick Start Guide