Cisco TelePresence SX20 Setup Manual - Page 6

Browse online or download pdf Setup Manual for Conference System Cisco TelePresence SX20. Cisco TelePresence SX20 8 pages. In-room control on touch 10
Also for Cisco TelePresence SX20: Quick Set (8 pages), Getting Started Manual (41 pages), Getting Started Manual (42 pages), Quick Reference Manual (2 pages), Quick Set (2 pages), Quick Reference Manual (2 pages), User Manual (34 pages), User Manual (29 pages), Troubleshooting Manual (37 pages), Regulatory Compliance And Safety Information Manual (9 pages), User Manual (38 pages), Installation Manual (2 pages), User Manual (2 pages), Quick Reference Manual (2 pages), User Manual (37 pages), Manual (45 pages), Manual (45 pages), Installation Sheet (2 pages), Installation Manual (2 pages), User Manual (34 pages), User Manual (5 pages), User Manual (38 pages), User Manual (38 pages), Getting Started Manual (42 pages), Reference Manual (8 pages), Getting Started Manual (46 pages)

Print Page
Cisco TelePresence SX20 Setup Manual
5
Using Web Interface
In general, we recommend you to use the web interface to administer and maintain
the system. The web interface is the administration portal for the system. You can
connect from a computer and administer the system remotely. It provides full con -
figuration access and offers tools and mechanisms for maintenance.
1
3
The web interface is organized in sub-pages. All sub-pages shown below are
available if the video system is registerd to an on-premise service (CUCM, VCS);
the pages shown in grey color are not available if the video system is registered to
the Cisco cloud service (Cisco Spark).
Main menu
Home
Call Control
Setup
Con guration
Status
Peripherals
Personalization
Favorites
1
Launch a Web browser
and enter the IP address
into the address bar, then
press [Enter] key.
2
2
Enter your [user name] and
[passphrase].
The default user name is [ad-
min] with no passphrase set.
3
Click [Sign In].
Security
Maintenance
Integration
In-Room Control
Users
Diagnostics
Startup Scripts
Access PIN
System Logs
Developer API
Server Certi cates
Call Logs
CUCM Certi cates
User Interface Screenshots
Certi cate Authorities
Software Upgrade
Strong Security Mode
Option Keys
Sign In Banner
Backup and Restore
Non-persistent Mode
System Recovery
Restart
6
Configuring Direct IP Address Calls
Without a provisioning system, you must configure each video system individually.
To be able to make calls, you must set the IP address, if not provided by the net -
work, and SIP/H.323 parameters.
1
2
3
6
Configuring Direct IP Address Calls
1
Click [Setup].
2
Click [Configuration].
3
Click [Conference].
4
In the [DefaultCall] section,
5
4
select [H323] from the
[Protocol] drop down list.
5
Click [Save].
Cisco TelePresence SX20 Quick Set Easy Setup Guide