Cisco TelePresence SX20 Setup Manual - Page 7

Browse online or download pdf Setup Manual for Conference System Cisco TelePresence SX20. Cisco TelePresence SX20 8 pages. In-room control on touch 10
Also for Cisco TelePresence SX20: Quick Set (8 pages), Getting Started Manual (41 pages), Getting Started Manual (42 pages), Quick Reference Manual (2 pages), Quick Set (2 pages), Quick Reference Manual (2 pages), User Manual (34 pages), User Manual (29 pages), Troubleshooting Manual (37 pages), Regulatory Compliance And Safety Information Manual (9 pages), User Manual (38 pages), Installation Manual (2 pages), User Manual (2 pages), Quick Reference Manual (2 pages), User Manual (37 pages), Manual (45 pages), Manual (45 pages), Installation Sheet (2 pages), Installation Manual (2 pages), User Manual (34 pages), User Manual (5 pages), User Manual (38 pages), User Manual (38 pages), Getting Started Manual (42 pages), Reference Manual (8 pages), Getting Started Manual (46 pages)

Print Page
Cisco TelePresence SX20 Setup Manual
6
7
8
9
10
6
Click [Network Services].
7
Select [On] from the [H323
Mode] drop down list.
8
Select [Off] from the [SIP
Mode] drop down list.
9
Click [Save].
10
Click [H323].
11
12
13
14
Caution
In the router, the following ports must be routed to the system s IP address:
Port 1720
・
・
Port 5555-6555
Port 2326-2487
・
6
Configuring Direct IP Address Calls
11
Select [Direct] from the
[CallSetup Mode] drop-
down list.
12
Select [Static] from the [b.
PortAllocation] drop down
list.
13
If you use a NAT router,
enter the configured H323
NAT address in the [Ad-
dress] field.
Define the external/global IP
address to the router with NAT
support. Packets sent to the
router will then be routed to the
system.
14
Select
[On]
from
[Mode] drop down list.
15
Click [Save].
Cisco TelePresence SX20 Quick Set Easy Setup Guide
the