Cisco TelePresence SX20 Getting Started Manual - Page 22

Browse online or download pdf Getting Started Manual for Conference System Cisco TelePresence SX20. Cisco TelePresence SX20 42 pages. In-room control on touch 10
Also for Cisco TelePresence SX20: Quick Set (8 pages), Getting Started Manual (41 pages), Getting Started Manual (42 pages), Quick Reference Manual (2 pages), Quick Set (2 pages), Quick Reference Manual (2 pages), User Manual (34 pages), User Manual (29 pages), Troubleshooting Manual (37 pages), Regulatory Compliance And Safety Information Manual (9 pages), Setup Manual (8 pages), User Manual (38 pages), Installation Manual (2 pages), User Manual (2 pages), Quick Reference Manual (2 pages), User Manual (37 pages), Manual (45 pages), Manual (45 pages), Installation Sheet (2 pages), Installation Manual (2 pages), User Manual (34 pages), User Manual (5 pages), User Manual (38 pages), User Manual (38 pages), Reference Manual (8 pages), Getting Started Manual (46 pages)

Print Page

Cisco TelePresence Video Systems

Contents

Setting the Administrator Settings

menu password

When starting up the system for the first time the Administrator

Settings menu password is not set.

A warning on the screen of your video system indicates if no

administrator password is set. to remove the warning you

must set an administrator password. if you wish to remove

the warning without setting a password, you can leave the

password field blank, though this is not advisable.

NoTe:

We strongly recommend that you define a password to

protect the Administrator Settings menu, since these settings

affect the behavior of the video conference system.

1. Go to

Home > Settings > Administrator settings > Set

password.

on the remote control, press the # key to toggle between

lower or upper case characters and numbers: abc/ABC/123.

2. enter the menu password. the password you enter is

hidden; each character is replaced with an asterisk (*).

3. Select

Save

to save the changes, or

Cancel

saving.

4. Press

Home

(

)

to exit.

Back to task overview

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

to leave without

Confirguration

Configuration

Getting Started Guide

Appendices

Contacts