Cisco TelePresence Server 7010 Getting Started - Page 13

Browse online or download pdf Getting Started for Network Hardware Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 16 pages. 600w ac-input power supply and fan tray replacement
Also for Cisco TelePresence Server 7010: Replacement Instructions Manual (23 pages), Installation Instructions Manual (15 pages), Installation Manual (14 pages), Replacement Instructions Manual (18 pages)

Print Page
Cisco TelePresence Server 7010 Getting Started

Replacing the power supply

Only replace the power supply under the guidance of Cisco customer
!
support.
The power supply will be installed when you receive your Cisco TS 7010. To replace
the power supply:
1
Remove the power cable from the unit to disconnect the power.
2
Push the power supply latch to the right and grip the handle firmly. Pull the
power supply to remove it.
3
Insert the replacement power supply so that the latch is at the bottom left.
4
Push the power supply firmly into the unit until the latch engages.
5
Reconnect the power cable.
Figure 3: Replacing the power supply
Replacing the power supply
13