Cisco TelePresence Server 7010 Primeros pasos - Página 13
Navegue en línea o descargue pdf Primeros pasos para Hardware de red Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 16 páginas. 600w ac-input power supply and fan tray replacement
También para Cisco TelePresence Server 7010: Manual de instrucciones de sustitución (23 páginas), Manual de instrucciones de instalación (15 páginas), Manual de instalación (14 páginas), Manual de instrucciones de sustitución (18 páginas)
Imprimir página
Replacing the power supply
Only replace the power supply under the guidance of Cisco customer
!
support.
The power supply will be installed when you receive your Cisco TS 7010. To replace
the power supply:
1
Remove the power cable from the unit to disconnect the power.
2
Push the power supply latch to the right and grip the handle firmly. Pull the
power supply to remove it.
3
Insert the replacement power supply so that the latch is at the bottom left.
4
Push the power supply firmly into the unit until the latch engages.
5
Reconnect the power cable.
Figure 3: Replacing the power supply
Replacing the power supply
13