Cisco TelePresence Server 7010 Aan de slag - Pagina 13
Blader online of download pdf Aan de slag voor {categorie_naam} Cisco TelePresence Server 7010. Cisco TelePresence Server 7010 16 pagina's. 600w ac-input power supply and fan tray replacement
Ook voor Cisco TelePresence Server 7010: Handleiding vervangende instructies (23 pagina's), Handleiding voor installatie-instructies (15 pagina's), Installatiehandleiding (14 pagina's), Handleiding vervangende instructies (18 pagina's)
Pagina afdrukken
Replacing the power supply
Only replace the power supply under the guidance of Cisco customer
!
support.
The power supply will be installed when you receive your Cisco TS 7010. To replace
the power supply:
1
Remove the power cable from the unit to disconnect the power.
2
Push the power supply latch to the right and grip the handle firmly. Pull the
power supply to remove it.
3
Insert the replacement power supply so that the latch is at the bottom left.
4
Push the power supply firmly into the unit until the latch engages.
5
Reconnect the power cable.
Figure 3: Replacing the power supply
Replacing the power supply
13