Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine Assembly And Set-Up Manual - Page 5

Browse online or download pdf Assembly And Set-Up Manual for Software Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine. Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine 14 pages. Product support bulletin
Also for Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine: Brochure & Specs (8 pages), Specification Sheet (8 pages), Quick Installation Manual (34 pages), Product Information (17 pages), Quick Reference (10 pages), Specifications (4 pages), Product Support Bulletin (44 pages)

Print Page
Epson Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine Assembly And Set-Up Manual

Assembling the Printer and Stand

Mounting the printer on the stand
1. Position the stand in front of the printer (K) as
shown.
2. Lock the two casters and extend the two
stabilizer knobs underneath the stand.
3. Lift the printer by the eight hand grips shown
below.
top view
c
Caution:
Do not attempt to lift the printer with fewer
than four people.
4. Insert the printer into the guide pins on the
stand.
Note:
When you place the printer on the stand, match the
right end square of the printer to the square of the
same part of the stand.
5. Screw the two wing nuts and washers (J) into
the left and right joint holes at the side-inner
of the stand, and tighten them.
J
6. Release the front casters and the stabilizer
knobs and move the printer to the place of use
(a short distance away). Lock the casters and
extend the stabilizer knobs after moving.
J
3