Blackberry Radar H2 Installation Manual - Page 27

Browse online or download pdf Installation Manual for Radar Blackberry Radar H2. Blackberry Radar H2 30 pages. Dry van, insulated trailers roll-up doors
Also for Blackberry Radar H2: Installation Manual (33 pages), Installation Manual (26 pages), Installation Manual (25 pages), Installation Manual (32 pages), Installation Manual (33 pages), Installation Manual (34 pages), Installation Manual (35 pages), Instruction Manual (33 pages), Installation Manual (32 pages), Installation Manual (26 pages), Installation Manual (25 pages), Installation Manual (28 pages)

Print Page

3.4.4.1

Well nut installation procedure (doors with windows)

1. Before beginning the install, check the interior surface of the door to ensure your

planned mounting location will not damage any door hardware (i.e., door latches,

locks, etc.).

Tip: On some vehicles, where the planned mounting location is in front of a

latch, you may want to verify the suitability of the area for mounting by

checking behind the interior door panel.

2. After selecting the best installation location for your van, install the template. Using a

drill bit, appropriately sized for your well nut, drill a hole through each of the cross

hairs on the template. This will create four holes you will use to install the well nuts,

enabling you to mount the module.

3. After drilling the holes and removing your template, install the well nut into the holes.

BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE 27