Aleko Victoria Series Instructions For Installation And Operation Manual - Page 8
Browse online or download pdf Instructions For Installation And Operation Manual for Accessories Aleko Victoria Series. Aleko Victoria Series 12 pages. Sizes 6.5x5 8x6.5 10x8
Also for Aleko Victoria Series: Installation Manual (20 pages), Assembly Manual (14 pages), Installation Manual (17 pages)
Print Page
Page 7
Installation Procedure
1. Measure the distance along the wall where it can be placed. Drill holes for wall
brackets on the wall according to the installation distances and height of the wall brackets.
The diameter and depth of hole must be the same as expansion bolts.
3.5 Inch
Ground
2. Hammer all the expansion bolts into the holes. Then
take down the nuts and washer.
(Note): The expansion bolts must be hammered into the wall
completely.
The bolts must be stick out of the wall so that the wall brackets
can be installed on it.
The nut and washer might be separated from the bolt during
process of transportation, please put them back into their original
positions before hammer them into the wall.)
The holes of each group must be on
the same line in transversal
direction and vertical direction.
(Note: It is recommended to draw
lines on the wall first to ensure
precise position and size of the
holes)
3. Take down the original bolts of the wall
brackets as shown in the figure, use
expansion bolts to fix the wall brackets on
the wall. Do not tighten completely, leave
wall brackets to stay on the wall with little
movement.
*** Make sure all the all bases are on the same
horizontal line.