Aleko Victoria Series Инструкции по установке и эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Инструкции по установке и эксплуатации для Аксессуары Aleko Victoria Series. Aleko Victoria Series 12 страниц. Sizes 6.5x5 8x6.5 10x8
Также для Aleko Victoria Series: Руководство по установке (20 страниц), Руководство по сборке (14 страниц), Руководство по установке (17 страниц)

Page 7

Installation Procedure

1. Measure the distance along the wall where it can be placed. Drill holes for wall

brackets on the wall according to the installation distances and height of the wall brackets.

The diameter and depth of hole must be the same as expansion bolts.

3.5 Inch

Ground

2. Hammer all the expansion bolts into the holes. Then

take down the nuts and washer.

(Note): The expansion bolts must be hammered into the wall

completely.

The bolts must be stick out of the wall so that the wall brackets

can be installed on it.

The nut and washer might be separated from the bolt during

process of transportation, please put them back into their original

positions before hammer them into the wall.)

The holes of each group must be on

the same line in transversal

direction and vertical direction.

(Note: It is recommended to draw

lines on the wall first to ensure

precise position and size of the

holes)

3. Take down the original bolts of the wall

brackets as shown in the figure, use

expansion bolts to fix the wall brackets on

the wall. Do not tighten completely, leave

wall brackets to stay on the wall with little

movement.

*** Make sure all the all bases are on the same

horizontal line.