3D Systems Cubify CUBEX Duo Replacement Manual - Page 11
Browse online or download pdf Replacement Manual for 3D Printers 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 13 pages. Replacing a main board pcb
Also for 3D Systems Cubify CUBEX Duo: Replacement Manual (17 pages), Manual (10 pages), Manual (10 pages)
Print Page
5. Slowly raise the print pad until it lifts the new print tip in line with the others. All
three print tips should be touching the bed without putting any pressure on it.
6. Turn the CubeX printer off and unplug it from the mains power supply.
7. Using the 2.5mm hex driver, tighten the print jet holding bolt (pictured) to lock the
print jet in place.
With the print tips levelled you can now turn on the CubeX printer and set the print tip
offsets
Setting Print Tip offsets
See the CubeX user guide for instructions on how to set your print tip offsets.
11