3D Systems Cubify CUBEX Duo Manual de substituição - Página 11

Procurar online ou descarregar pdf Manual de substituição para Impressoras 3D 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 13 páginas. Replacing a main board pcb
Também para 3D Systems Cubify CUBEX Duo: Manual de substituição (17 páginas), Manual (10 páginas), Manual (10 páginas)

Imprimir página

3D Systems Cubify CUBEX Duo Manual de substituição

1. Removing the Damaged Print Jet
2. Installing the New Print Jet

5. Slowly raise the print pad until it lifts the new print tip in line with the others. All

three print tips should be touching the bed without putting any pressure on it.

6. Turn the CubeX printer off and unplug it from the mains power supply.

7. Using the 2.5mm hex driver, tighten the print jet holding bolt (pictured) to lock the

print jet in place.

With the print tips levelled you can now turn on the CubeX printer and set the print tip

offsets

Setting Print Tip offsets

See the CubeX user guide for instructions on how to set your print tip offsets.