3D Systems Cubify CUBEX Duo Manual de substituição - Página 12
Procurar online ou descarregar pdf Manual de substituição para Impressoras 3D 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 13 páginas. Replacing a main board pcb
Também para 3D Systems Cubify CUBEX Duo: Manual de substituição (17 páginas), Manual (10 páginas), Manual (10 páginas)
Imprimir página
Fastening the print tip on a CubeX
A CubeX with a single print jet does not have a second or third nozzle to reference
the print tip level. Instead you have to use the CubeX wiping stick.
1. Power on the CubeX printer
2. Put the CubeX into manual move.
3. Raise the print pad until it is approximately 5mm away from the print tip.
4. Slowly raise the print pad until the print tip is touching it.
5. Continue raising the print pad until there is approximately 0.5mm between the
print pad and the CubeX wiping stick.
12