3D Systems Cubify CUBEX Duo Manuel de remplacement - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de remplacement pour {nom_de_la_catégorie} 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 13 pages. Replacing a main board pcb
Également pour 3D Systems Cubify CUBEX Duo : Manuel de remplacement (17 pages), Manuel (10 pages), Manuel (10 pages)
Imprimer la page
Fastening the print tip on a CubeX
A CubeX with a single print jet does not have a second or third nozzle to reference
the print tip level. Instead you have to use the CubeX wiping stick.
1. Power on the CubeX printer
2. Put the CubeX into manual move.
3. Raise the print pad until it is approximately 5mm away from the print tip.
4. Slowly raise the print pad until the print tip is touching it.
5. Continue raising the print pad until there is approximately 0.5mm between the
print pad and the CubeX wiping stick.
12