3D Systems Cubify CUBEX Duo Руководство по замене - Страница 12

Просмотреть онлайн или скачать pdf Руководство по замене для 3D-принтеры 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 13 страниц. Replacing a main board pcb
Также для 3D Systems Cubify CUBEX Duo: Руководство по замене (17 страниц), Руководство (10 страниц), Руководство (10 страниц)

Печатать страницу

3D Systems Cubify CUBEX Duo Руководство по замене

Fastening the print tip on a CubeX

A CubeX with a single print jet does not have a second or third nozzle to reference

the print tip level. Instead you have to use the CubeX wiping stick.

1. Power on the CubeX printer

2. Put the CubeX into manual move.

3. Raise the print pad until it is approximately 5mm away from the print tip.

4. Slowly raise the print pad until the print tip is touching it.

5. Continue raising the print pad until there is approximately 0.5mm between the

print pad and the CubeX wiping stick.