3D Systems Cubify CUBEX Duo Manuale di sostituzione - Pagina 12
Sfoglia online o scarica il pdf Manuale di sostituzione per Stampanti 3D 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 13. Replacing a main board pcb
Anche per 3D Systems Cubify CUBEX Duo: Manuale di sostituzione (17 pagine), Manuale (10 pagine), Manuale (10 pagine)
Stampa la pagina
Fastening the print tip on a CubeX
A CubeX with a single print jet does not have a second or third nozzle to reference
the print tip level. Instead you have to use the CubeX wiping stick.
1. Power on the CubeX printer
2. Put the CubeX into manual move.
3. Raise the print pad until it is approximately 5mm away from the print tip.
4. Slowly raise the print pad until the print tip is touching it.
5. Continue raising the print pad until there is approximately 0.5mm between the
print pad and the CubeX wiping stick.
12