- ページ 12

3Dプリンター 3D Systems Cubify CUBEX DuoのPDF 交換マニュアルをオンラインで閲覧またはダウンロードできます。3D Systems Cubify CUBEX Duo 13 ページ。 Replacing a main board pcb
3D Systems Cubify CUBEX Duo にも：交換マニュアル (17 ページ), マニュアル (10 ページ), マニュアル (10 ページ)

ページを印刷する

1. Removing the Damaged Print Jet
2. Installing the New Print Jet

Fastening the print tip on a CubeX

A CubeX with a single print jet does not have a second or third nozzle to reference

the print tip level. Instead you have to use the CubeX wiping stick.

1. Power on the CubeX printer

2. Put the CubeX into manual move.

3. Raise the print pad until it is approximately 5mm away from the print tip.

4. Slowly raise the print pad until the print tip is touching it.

5. Continue raising the print pad until there is approximately 0.5mm between the

print pad and the CubeX wiping stick.