3D Systems Cubify CUBEX Duo Ersatz-Handbuch - Seite 11
Blättern Sie online oder laden Sie pdf Ersatz-Handbuch für 3D-Drucker 3D Systems Cubify CUBEX Duo herunter. 3D Systems Cubify CUBEX Duo 13 Seiten. Replacing a main board pcb
Auch für 3D Systems Cubify CUBEX Duo: Ersatz-Handbuch (17 seiten), Handbuch (10 seiten), Handbuch (10 seiten)
Seite drucken
5. Slowly raise the print pad until it lifts the new print tip in line with the others. All
three print tips should be touching the bed without putting any pressure on it.
6. Turn the CubeX printer off and unplug it from the mains power supply.
7. Using the 2.5mm hex driver, tighten the print jet holding bolt (pictured) to lock the
print jet in place.
With the print tips levelled you can now turn on the CubeX printer and set the print tip
offsets
Setting Print Tip offsets
See the CubeX user guide for instructions on how to set your print tip offsets.
11